Subaru Legacy BN/BS (2015-2019) Service Manual: Assembly

Subaru Legacy BN/BS (2015-2019) Service Manual / Continuously variable transmission(tr690) / Oil pump chain / Assembly

1. DRIVE SPROCKET

1. Using the ST, install the ball bearing.

NOTE:

Use a new ball bearing.

ST 499755602

PRESS SNAP RING

Removal

1. Remove the transmission assembly from the vehicle. Automatic Transmission Assembly > REMOVAL2. Remove the torque converter assembly. Torque Converter Assembly > REMOVAL3. Remove the oil pump chai ...

Installation

1. Clean the mating surface of oil pump chain cover and converter case cover.2. Using the ST, install the oil seal.ST 499755602PRESS SNAP RING3. Install the drive sprocket and install the snap ring ...

Other materials:

Dtc p059a active grille air shutter "a" position sensor circuit
DTC DETECTING CONDITION:Immediately at fault recognitionCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE.STEPCHECKYESNO1.CHECK ACTIVE GRILLE SHUTTER.Check the area around the active grille sh ...