1. Install the new ball bearing (large) to reduction driven gear using the ST.
NOTE: • Use a new ball bearing. • Install to the splines inside transfer reduction driven gear shaft. 2. Install the new ball bearing (small) to reduction driven gear. NOTE: Use a new ball bearing.
|
Dtc b11e0 rollover deployment history
DIAGNOSIS START CONDITION:Ignition voltage is 10 V to 16 V.DTC DETECTING CONDITION:This DTC is indicated when the curtain airbag module and the seat belt pretensioner are deployed.Once this DTC is displayed, the memory cannot be cleared. Replace the following parts.• Airbag control module Air ...