1. BUSHING - REAR AXLE HOUSING Do not remove the housing assembly - rear axle because the bushing - rear axle housing cannot be replaced. If it is removed, replace the housing assembly - rear axle. 2. BUSHING - TRAILING LINK 1. Before assembly, inspect the following items and replace any faulty part with a new one. • Perform visual check for damage or bend on the trailing link. • Visually check the bushing for abnormal cracks, fatigue or damage. 2. Press-fit the bushing using ST and the hydraulic press. CAUTION: Make sure to press the bushing straight in. Preparation tool: ST1: BUSHING REMOVER (20099FG000) ST2: INSTALLER & REMOVER (BASE) (20099PA010)
|
Installation
1. Install the center differential and transfer driven gear into the transfer case as a unit. Transfer Driven Gear > INSTALLATION2. Select the adjusting washer. Transfer Case and Extension Case Assembly > INSTALLATION3. Install the transfer driven gear. Transfer Driven Gear > INSTALLATION4. Insta ...