Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Service Manual: Assembly

CAUTION:

Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb.

1. TURN SIGNAL LIGHT BULB

1. Install the turn signal light bulb.

2. Install the bulb socket.

2. SIDE MARKER LIGHT BULB

1. Install the side marker light bulb.

2. Install the bulb socket.

Removal
1. SEDAN MODEL1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the trunk trim panel - side. Trunk Room Trim > REMOVAL3. Remove the light assembly - rear combination.(1) Remove th ...

Installation
1. SEDAN MODEL1. Replace the light assembly gasket with a new part.2. Install the light assembly - rear combination.CAUTION:Be careful not to catch the harness in between the parts.Tightening torque:4 ...

Other materials:

Assembly
1. Clean the holes in the sliding surface between the clutch pedal and bushing, and apply grease.2. Attach the clutch pedal pad, clutch pedal stopper, bushing A, torsion spring bushing, spacer and bushing to the clutch pedal.NOTE:Clean the inside of the bushings and apply grease before installing th ...

© 2017-2024 Copyright www.sulegacy.com