1. REVERSE IDLER GEAR ASSY 1. Attach the reverse idler sub gear and reverse idler spring. NOTE: Point the stamp (marking A) towards the outside, and install the reverse idler sub gear.
2. Install the friction plate and snap ring. NOTE: Make sure the friction plate is installed in the proper direction.
|
Clear memory mode operation
1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».3. On «Main Menu» display, select «Each System».4. On «Select System» display, select «Subaru Rear Vehicle Detection(RH)» or «Subaru Rear Vehicle ...