Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Service Manual: Assembly

1. Install each cover to the front exhaust pipe.

Tightening torque:

13 N·m (1.3 kgf-m, 9.6 ft-lb)

2. Install the center exhaust pipe to front exhaust pipe.

NOTE:

Use a new gasket.

Tightening torque:

42.5 N·m (4.3 kgf-m, 31.3 ft-lb)

3. Install the front oxygen (A/F) sensor and rear oxygen sensor to the front exhaust pipe. Front Oxygen (A/F) Sensor > INSTALLATION Rear Oxygen Sensor > INSTALLATION

Removal
CAUTION:Vehicle components are extremely hot after driving. Be wary of receiving burns from heated parts.1. Disconnect the ground terminal from battery sensor. NOTE2. Lift up the vehicle.3. Remove th ...

Installation
1. Install the front exhaust pipe and center exhaust pipe as a unit to the vehicle.NOTE:Use a new gasket.2. Temporarily tighten the nuts which hold front exhaust pipe to cylinder heads.3. Install the ...

Other materials:

Accessory power outlets
Power outlet below the climate control Power outlet in the center console (if equipped) Power outlet in the cargo area (Outback) Accessory power outlets are provided below the climate control, in the center console and in the cargo area. Electrical power (12V DC) from the battery i ...

© 2017-2024 Copyright www.sulegacy.com