Subaru Legacy BN/BS (2015-2019) Service Manual: Assembly

Subaru Legacy BN/BS (2015-2019) Service Manual / Exhaust(h6do) / Front exhaust pipe / Assembly

1. Install each cover to the front exhaust pipe.

Tightening torque:

13 N·m (1.3 kgf-m, 9.6 ft-lb)

2. Install the front oxygen (A/F) sensor and rear oxygen sensor. Front Oxygen (A/F) Sensor > INSTALLATION Rear Oxygen Sensor > INSTALLATION

3. Install the front exhaust pipe (RH) to the front exhaust pipe (LH).

NOTE:

Use a new gasket.

Tightening torque:

30 N·m (3.1 kgf-m, 22.1 ft-lb)

Removal

CAUTION:Vehicle components are extremely hot after driving. Be wary of receiving burns from heated parts.1. Disconnect the ground terminal from battery sensor. NOTE2. Lift up the vehicle.3. Remove th ...

Installation

1. Install the front exhaust pipe assembly.NOTE:Use a new gasket.2. Temporarily tighten the nuts which hold front exhaust pipe assembly to cylinder heads.3. Install the bolts, springs and nuts securin ...

Other materials:

Inspection
1. Check that the electronic throttle control relay has no deformation, cracks or other damages.2. Measure the resistance between electronic throttle control relay terminals.Terminal No.Standard1 and 21 M- or more3 and 4130.4 — 230.8 - (when 20°C (68°F))3. Connect battery positive te ...