Subaru Legacy BN/BS (2015-2019) Owners Manual: AT OIL TEMP warning light (CVT models)
If this light illuminates when the engine is running, it may indicate that the transmission fluid temperature is too hot. If the light illuminates while driving, immediately stop the vehicle in a safe place and let the engine idle until the warning light turns off. Transmission control system warning If the "AT OIL TEMP" warning light flashes after the engine has started, it may indicate that the transmission control system is not working properly. Contact your nearest SUBARU dealer for service immediately. |
Engine low oil level warning indicator
This indicator appears when the engine oil
level decreases to the lower limit.
If the engine low oil level warning indicator
appears while driving, park the vehicle at a
safe and level location, ...
Low tire pressure warning light (U.S. spec. models)
When the ignition switch is turned to the
"ON" position, the low tire pressure warning
light will illuminate for approximately 2
seconds to check that the tire pressure
monitoring system (TPMS) is ...
Other materials:
Disassembly
1. Remove the drive pinion assembly.2. Flatten the tab of the lock nut.3. Using ST1 and ST2, fix at the spline portion of drive pinion shaft to remove the lock nut.ST1 18621AA000WRENCHST2 18667AA010HOLDER4. Remove the taper roller bearing and outer race from drive pinion shaft.5. Remove the in ...
