Subaru Legacy BN/BS (2015-2019) Service Manual: Auto headlight beam leveler system

Installation

1. Install the auto headlight beam leveler CM.Tightening torque:7.5 N·m (0.8 kgf-m, 5.5 ft-lb)2. Install the relay holder.3. Install the panel - knee guard.Tightening torque:7 N·m (0.7 k ...

Procedure

When parts related to the auto headlight beam leveler system are removed or replaced, perform the following procedures to initialize or reinitialize.NOTE:Before performing initialization or reinitiali ...

Other materials:

Dtc c1811 system
DTC DETECTING CONDITION:A fault is detected if VDC control status continues for 15 seconds or more.TROUBLE SYMPTOM:• ABS does not operate.• VDC does not operate.• Hill hold does not function.• EyeSight does not operate. (Models with EyeSight)STEPCHECKYESNO1.CHECK INSTALLATION ...