Subaru Legacy BN/BS (2015-2019) Service Manual: Blower resistor (manual a c model)

Installation

CAUTION:• Do not start the engine before charging refrigerant.• If the engine is started with no refrigerant charge, replace the compressor assembly.• Replace O-rings and pipe clamps ...

Removal

1. Disconnect the ground terminal from battery sensor. NOTE2. Release the hook, and remove the under cover assembly - passenger.3. Remove the blower resistor.(1) Disconnect the connector.(2) Remove t ...

Other materials:

Component
(1)Spark plug(2)Ignition coilTightening torque: N·m (kgf-m, ft-lb) T1:16 (1.6, 11.8) T2:21 (2.1, 15.5) ...