Subaru Legacy BN/BS (2015-2019) Service Manual: Camshaft

Installation

1. Install the cam sprocket.2. Use the ST to lock the cam sprocket, and install the cam sprocket bolt.Tightening torque:Tighten to a torque of 29.5 N·m (3.0 kgf-m, 21.8 ft-lb), and then tighten ...

Removal

1. Remove the engine from vehicle. Engine Assembly > REMOVAL2. Remove the crank pulley. Crank Pulley > REMOVAL3. Remove the chain cover. Chain Cover > REMOVAL4. Remove the timing chain assembly. T ...

Other materials:

Compression inspection
CAUTION:After warming-up, engine becomes very hot. Be careful not to burn yourself during measurement.NOTE:• Before checking the compression pressure, the compression condition of each cylinder can be confirmed as a guide by using the compression measurement mode in Subaru Select Monitor. Act ...