Subaru Legacy BN/BS (2015-2019) Owners Manual: Canceling the Reverse Automatic Braking system operation

Subaru Legacy BN/BS (2015-2019) Owners Manual / Starting and operating / Reverse Automatic Braking System (if equipped) / Canceling the Reverse Automatic Braking system operation

The Reverse Automatic Braking system can be temporarily canceled by any of the following operation.

While automatic braking is in operation, the brake pedal is depressed
While automatic braking is in operation, the accelerator pedal is depressed
The accelerator pedal is depressed hard (in this case, limited acceleration will be canceled and the vehicle will continue reversing)
The select lever is shifted to a position other than the "R" position

NOTE The system will be canceled if the object is no longer detected.

Reverse Automatic Braking System operation

When Reverse Automatic Braking System is in operation, an audible warning beeps will sound in 3 levels to warn the driver of a potential collision. 1) First braking and warning: When the system d ...

RAB warning indicator

If the Reverse Automatic Braking System malfunctions, the above indicator illuminates on the combination meter. Contact the nearest SUBARU dealer for details. ...

Other materials:

Dtc p0172 system too rich bank 1
DTC DETECTING CONDITION:Detected when two consecutive driving cycles with fault occur.TROUBLE SYMPTOM:• Improper idling• Engine stalls.• Poor driving performanceCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspecti ...