1. The airbag system wiring harness is routed near the TCM. CAUTION: • All the airbag system wiring harnesses and connectors are colored yellow. Do not use an electric test equipment to check these circuits. • Be careful not to damage the airbag system wiring harness when performing diagnostics or servicing the TCM. 2. When measuring the voltage or resistance of individual sensor or all electrical control modules, use a tapered pin with a diameter of 0.6 mm (0.024 in) or less and touch it to the tip of terminal. Never insert the tapered pin into the terminal because it deforms inside which may lead to malfunction. CAUTION: If a pin (or similar) was inserted in TCM connector, replace the TCM connector. 3. The TCM connector is waterproof. When measuring the TCM connector terminal voltage, or the resistance between the terminals, use the ST.
|
Determining compatibility of tire and vehicle
load capacities
The sum of four tires' maximum
load ratings must exceed the maximum
loaded vehicle weight
("GVWR"). In addition, sum of the
maximum load ratings of two front
tires and of two rear tires must
exceed each axle's maximum
loaded capacity ("GAWR"). Original
equipment tires are designed to
fulfil ...