Subaru Legacy BN/BS (2015-2019) Service Manual: Caution

Subaru Legacy BN/BS (2015-2019) Service Manual / Entertainment / General description / Caution

• Before disconnecting connectors of sensors or units, be sure to disconnect the ground cable from battery. When replacing the electrical parts provided with memory functions that store contents specified by a customer, record the memory contents before disconnecting the battery ground cable.

• Be careful of the following items. Failing to do so may cause the airbag system malfunction.

– Yellow connectors and harnesses with yellow tapes around them are the connectors and harnesses for the airbag system. When using a tester on these circuits, follow the cautions of “AIRBAG SYSTEM”. General Description > CAUTION

– Be careful not to damage the airbag system wiring harness when servicing the electrical parts around the steering column.

• When removing, installing or replacing the VDCCM&H/U, VDCCM&H/U bracket, steering wheel or steering angle sensor (steering roll connector), perform “VDC sensor midpoint setting mode” of the VDC. VDC Control Module and Hydraulic Control Unit (VDCCM&H/U) > ADJUSTMENT

Preparation tool

1. GENERAL TOOLTOOL NAMEREMARKSCircuit testerUsed for measuring resistance, voltage and current. ...

Location

1. AUDIO AND NAVIGATION SYSTEM(1)Speaker ASSY - tweeter LH(3)Speaker ASSY - tweeter RH(5)Satellite switch assembly(2)Speaker ASSY - center(4)Audio ASSY or navigation ASSY (A)Sedan model(B)OUTBACK mod ...

Other materials:

Inspection
1. COMMUNICATION FOR INITIALIZING THE AIRBAG SYSTEM IS IMPOSSIBLEDETECTING CONDITION:Defective harness connectorTROUBLE SYMPTOM:Communication is impossible between the airbag control module and the Subaru Select Monitor.NOTE:Refer to “Communication for Initializing Impossible” in AIRBAG ...