Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Service Manual: Caution

Before disconnecting connectors of sensors or units, be sure to disconnect the ground cable from battery.

When replacing the parts provided with memory functions such as audio, record the memory contents before disconnecting the battery ground cable.

Be careful of the following items. Failing to do so may cause the airbag system malfunction.

Yellow connectors and harnesses with yellow tapes around them are the connectors and harnesses for the airbag system. When using a tester on these circuits, follow the cautions of “AIRBAG SYSTEM”. General Description > CAUTION

Be careful not to damage the airbag system wiring harness when servicing the electrical parts around the steering column.

When removing, installing or replacing the VDCCM&H/U, VDCCM&H/U bracket, steering wheel or steering angle sensor (steering roll connector), perform “VDC sensor midpoint setting mode” of the VDC. VDC Control Module and Hydraulic Control Unit (VDCCM&H/U) > ADJUSTMENT

Preparation tool
1. GENERAL TOOLTOOL NAMEREMARKSCircuit testerUsed for measuring resistance, voltage and current. ...

Component
(1)Horn switch (driver’s airbag module ASSY)(3)Horn relay(5)Horn ASSY - Lo(2)Roll connector(4)Horn ASSY - Hi ...

Other materials:

Dtc b1010 body control system (biu) malfunction
DTC DETECTING CONDITION:System error in body integrated unit (integrated unit EEPROM malfunction)Time Needed for Diagnosis:ImmediatelyTROUBLE SYMPTOM:LAN communication immobilizer function may not be executed normally.STEPCHECKYESNO1.CHECK DTC.Check DTC indicated by body integrated unit. Read Diagn ...

© 2017-2024 Copyright www.sulegacy.com