Subaru Legacy BN/BS (2015-2019) Service Manual: Check cruise indicator light and cruise set indicator light

Subaru Legacy BN/BS (2015-2019) Service Manual / Cruise control system (diagnostics) / Diagnostics with phenomenon / Check cruise indicator light and cruise set indicator light

TROUBLE SYMPTOM:

Cruise control can be set, but the CRUISE indicator and SET indicator do not illuminate.

STEP	CHECK	YES	NO
1.CHECK CRUISE INDICATOR LIGHT AND CRUISE SET INDICATOR LIGHT. Perform the combination meter operation check. System Operation Check Mode	Do the CRUISE & SET indicators illuminate-	Diagnostics with Phenomenon > CHECK CRUISE INDICATOR LIGHT AND CRUISE SET INDICATOR LIGHT	Replace the meter case assembly. Combination Meter
2.CHECK LAN SYSTEM. Perform the diagnosis for LAN system. Basic Diagnostic Procedure	Is there any fault-	Perform the diagnosis according to the diagnosis for LAN system.	Replace the ECM. Engine Control Module (ECM) Engine Control Module (ECM)

Diagnostics with phenomenon

...

Diagnostic procedure with phenomenon

PhenomenonCheck ItemNote1CRUISE switch is not turned ON. (CRUISE indicator does not illuminate.) Or the cruise control is cancelled without CRUISE switch operation.(1) Perform cruise cancel conditions ...

Other materials:

Removal
1. SEDAN MODEL1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the trunk room mat.3. Remove the light assembly - rear combination. Rear Combination Light Assembly > REMOVAL4. Remove the bumper face - rear.(1) Remove the clips inside the wheel housing.(2) Remove the screws from ...