1. SUBARU SELECT MONITOR 1. On «Start» display, select «Diagnosis». 2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed». 3. On «Main Menu» display, select «Each System». 4. On «Select System» display, select «Engine Control System» and then «Enter». 5. On «Select Function» display, select «DTC». 6. On «DTC» display, select «Clear Memory». NOTE: • Initial diagnosis of electronic throttle control is performed after memory clearance. Wait for 10 seconds or more after turning the ignition switch to ON, and then start the engine. • For detailed operation procedures, refer to “Application help”. 2. GENERAL SCAN TOOL For procedures clearing memory using the general scan tool, refer to the general scan tool operation manual. NOTE: Initial diagnosis of electronic throttle control is performed after memory clearance. Wait for 10 seconds or more after turning the ignition switch to ON, and then start the engine. |
Location
Main fuse box (M/B)Fuse 7.5 A (data communication module)*1(A)Fuse 30 A (audio, navigation unit)(B)Fuse 20 A (audio amplifier)(C)Fuse & relay box (F/B)Fuse 20 A (rear accessory power supply socket)(D)Fuse 15 A (audio, navigation unit, audio amplifier, external connection terminal, data communication ...