Subaru Legacy BN/BS (2015-2019) Service Manual: Clear memory mode operation
1. On «Start» display, select «Diagnosis». 2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed». 3. On «Main Menu» display, select «Each System». 4. On «Select System» display, select «Air Conditioner» and select «Enter». 5. On «Select Function» display, select «DTC». 6. On «DTC» display, select «Clear Memory». NOTE: For detailed operation procedures, refer to “Application help”. |
Basic diagnostic procedure procedure
NOTE:When the sunload sensor check is performed indoors or in the shade, it could be diagnosed as sensor having an open circuit. Always perform the inspection in direct sunlight.STEPCHECKYESNO1.START ...
Diagnostic procedure for subaru select monitor communication communication for initializing impossible
DIAGNOSIS:Defective CAN communication circuitTROUBLE SYMPTOM:• LAN system is abnormal.• Communication failure between Subaru Select Monitor and A/C CMWIRING DIAGRAM:NOTE:For the coupling c ...
Other materials:
Engine lubrication system trouble in general inspection
Before performing diagnostics, make sure that the engine oil level is correct and no oil leakage exists.TroublePossible causeCorrective actionWarning light remains ON.a. Oil pressure switch failure Cracked diaphragm or oil leakage within switchReplace. Broken spring or seized contactsReplace.b ...
