Subaru Legacy BN/BS (2015-2019) Service Manual: Clear memory mode operation
1. On «Start» display, select «Diagnosis». 2. On «Vehicle selection» display, input the vehicle information and select «Confirmed». 3. On «Main Menu» display, select «Each System Check». 4. On «Select System» display, select «Power Steering». 5. On «Select Function» display, select «DTC». 6. On «DTC» display, select «Clear Memory». NOTE: • Before performing memory clear, check the current data, and if there are any data of DTC, trouble status information, overheating protection intervention history, IGN count from overheating protection and assist limit history, save them. • For detailed operation procedures, refer to “Application help”. |
Check list for interview check
Check the following items regarding condition of the vehicle.1. TROUBLE STATUSPhenomenon of the vehicle Steering is heavy Steering is not smooth Steering is unstable (wondering) Steering does not retu ...
Electrical component location location
(1)Steering gearbox (including power steering control module)(2)STEERING warning light ...
Other materials:
Dtc u0140 lost communication with body control module
DTC DETECTING CONDITION:No data is received from body integrated unit.TROUBLE SYMPTOM:Cooperation control with body integrated unit does not operate properly.STEPCHECKYESNO1.CHECK PERFORMING OF BASIC DIAGNOSTIC PROCEDURE.Was the basic diagnostic procedure performed up to STEP 8- Diagnostic Procedure ...
