1. Install the clutch pipe to the mass damper, clutch damper, master cylinder and pipe grommet.NOTE:Temporarily tighten the clutch pipe (D) to the clutch damper.Tightening torque:T: 15 N·m (1.5 ...
1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the instrument panel lower cover. Instrument Panel Lower Cover > REMOVAL3. Disconnect the connector from the clutch switch and cl ...
Other materials:
Inspection
SymptomsInspection stepsHorn does not sound1. Check the fuse.2. Check the horn relay.3. Check the roll connector.4. Check the horn switch.5. Check the horn assembly.6. Check the harness. ...