Subaru Legacy BN/BS (2015-2019) Service Manual: Compressor

Installation

1. Install the blower resistor.2. Install the under cover assembly - passenger.3. Connect the ground terminal to battery sensor. NOTE ...

Removal

1. H4 MODEL1. Perform compressor oil return operation. Compressor Oil > PROCEDURE2. Turn the A/C switch to OFF and stop the engine.3. Using the refrigerant recovery system, discharge refrigerant. Re ...

Other materials:

Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the V-belts. V-belt > REMOVAL3. Disconnect the connector (A) and terminal (B) from the generator, and remove the clip (C).4. Remove the V-belt cover bracket.5. Remove the generator from the generator bracket.6. Remove the V-belt ...