Subaru Legacy BN/BS (2015-2019) Owners Manual: Connecting and disconnecting a USB memory/portable device

Subaru Legacy BN/BS (2015-2019) Owners Manual / Audio / Audio set / Basic information before use / Connecting and disconnecting a USB memory/portable device

The USB port and the AUX jack are located as shown in the following illustration.

Connecting and disconnecting a USB memory/portable device

NOTE

This unit does not support commercially available USB hubs.
Turn on the power of the device when it is not turned on.
This device has a USB port for USB memory/portable device.
For compatible USB memory devices, refer to "USB memory device" .
For compatible iPod models, refer to "iPod" .
Even if a USB hub is used to connect more than two USB devices, only the first two connected devices will be recognized.

Initial screen

When the ignition switch is in the "ACC" or "ON" position, the initial screen will be displayed and the system will begin operating. When using the SUBARU STARLINK function (if equipped), ...

Basic operation

This section describes some of the basic features of the audio/visual system. Some information may not pertain to your system. Your audio/visual system works when the ignition switch is turned t ...

Other materials:

Warning screen
Example of warning If there is a warning message or a maintenance notification, it will appear for approximately 5 seconds. Take the appropriate actions based on the messages indicated. Journey time alert screen NOTE The journey time alert screen will appear 2 hours after the ig ...