Subaru Legacy BN/BS (2015-2019) Service Manual: Control panel

Installation

CAUTION:• Do not start the engine before charging refrigerant.• If the engine is started with no refrigerant charge, replace the compressor assembly.• If the condenser has been repla ...

Removal

1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the heater control assembly.(1) Release the clips and claws, then detach the control module cover.(2) Release the screws and clips ...

Other materials:

Electrical specification
1. POWER SEAT CONTROL MODULETerminal No.ContentsMeasuring conditionStandard(R155) No. 1 — — — (R155) No. 2 ←> Chassis groundLifter switch (down)Switch ON1.5 V or less(R155) No. 3 ←> Chassis groundLifter switch (up)Switch ON1.5 V or less(R155) No. 4 ←> Chassis groundTilt switch ...