1. RADIATOR Check that there are no engine coolant leaks from the hose connections. Refer to “CO” section for radiator inspection. Radiator > INSPECTION Radiator > INSPECTION 2. RADIATOR CAP Refer to “CO” section for radiator cap inspection. Radiator Cap > INSPECTION Radiator Cap > INSPECTION 3. COOLING FAN Refer to “CO” section for cooling fan inspection. Radiator Fan System > INSPECTION Radiator Fan System > INSPECTION 4. COOLING SYSTEM Start the engine, and then inspect that it does not overheat or it is not cooled excessively. If it overheats or it is cooled excessively, check the cooling system. |
Installation
1. Install the reduction drive gear to secondary pulley.2. Select the reduction drive gear shim. Reduction Drive Gear > ADJUSTMENT3. Install the dish plates, spring retainers, and selected reduction drive gear shims.NOTE:Install the dish plate in the correct direction.(A)Reduction drive gear shim(B ...