Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Service Manual: Crankshaft position sensor

Installation
1. INTAKE SIDE1. Install the camshaft position sensor, and connect the connector to the camshaft position sensor.Tightening torque:6.4 N·m (0.7 kgf-m, 4.7 ft-lb)2. Install the fuel injector. F ...

Removal
1. Remove the collector cover.(1) Carefully pull up the rear of collector cover at two positions (A).(2) Carefully pull up the front of collector cover at two positions (B) while moving it forward.2. ...

Other materials:

Inspection mode procedure
It is possible to diagnose the DTC by performing the indicated inspection mode. After correcting the DTC, perform a necessary inspection mode and make sure that the function is resumed correctly and the DTC is recorded.1. INSPECTION MODE 1DTCItemNoteB2600LIN COMMUNICATION — B2601LIN CIRCUIT LOW †...

© 2017-2024 Copyright www.sulegacy.com