Subaru Legacy BN/BS (2015-2019) Service Manual: Data link connector note
This connector is used for Subaru Select Monitor. CAUTION: Do not connect any scan tools other than Subaru Select Monitor or general scan tool because the circuit for Subaru Select Monitor may be damaged. Terminal No. | Contents | Terminal No. | Contents | 1 | Blank | 9 | Blank | 2 | Blank | 10 | Blank | 3 | Blank | 11 | Blank | 4 | Ground | 12 | Blank | 5 | Ground | 13 | Blank | 6 | CAN communication (Hi) | 14 | CAN communication (Lo) | 7 | Subaru Select Monitor signal | 15 | Blank | 8 | Blank | 16 | Power supply |
|
1. SUBARU SELECT MONITOR1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».3. On «Main Menu» display, se ...
1. CONTROL MODULE(1)Engine control module (ECM)(3)Data link connector(5)Delivery (test) mode fuse(2)Fuel pump control module (ECM)(4)Malfunction indicator light • Sedan model• OUTBACK mod ...
Other materials:
Inspection
1. CHECK FUSE1. Remove the fuse and inspect visually.2. If the fuse is blown out, replace the fuse.2. CHECK RELAY1. Measure the resistance between relay terminals.Terminal No.Inspection conditionsStandardCircuit1 — 2Always1 M- or more1 — 2Apply battery voltage between terminals 4 and 3.Less than ...