Subaru Legacy BN/BS (2015-2019) Owners Manual: Daytime running light system

Subaru Legacy BN/BS (2015-2019) Owners Manual / Instruments and controls / Light control switch / Daytime running light system

WARNING The brightness of the illumination of the high beam headlights is reduced by the daytime running light system.

The light switch must always be turned to the " " position when it is dark outside.

The high beam headlights will automatically illuminate at reduced brightness when the engine has started, under the following conditions.

The parking brake is fully released.
The light switch is in the off or " " position.
The light switch is in the "AUTO" position and the headlights do not turn on automatically.
The select lever is in a position other than the "P" position (CVT models).

NOTE

When the light switch is in the " " position, the front side marker lights, tail lights and license plate lights are illuminated.
While the turn signal is flashing, the high beam headlight on the side which the turn signal is flashing turns off.
While the hazard warning flasher is on, the high beam headlights turn off

Headlight flasher

CAUTION Do not hold the lever in the flashing position for more than just a few seconds. To flash the headlights, pull the lever toward you and then release it. The high be ...

Headlight beam leveler (models with HID headlights)

The HID headlights generate more light than conventional halogen headlights. Therefore a driver of an oncoming vehicle may experience too much glare when your headlight beam height adjustment is ...

Other materials:

Cooling fan, hose and connections
Your vehicle employs an electric cooling fan which is thermostatically controlled to operate when the engine coolant reaches a specific temperature. 1) Normal operating range If the radiator cooling fan does not operate even when the engine coolant temperature gauge exceeds the normal ope ...