Subaru Legacy BN/BS (2015-2019) Service Manual: Diagnostics with phenomenon list

Subaru Legacy BN/BS (2015-2019) Service Manual / Telematics system (diagnostics) / Diagnostics with phenomenon list

No.	Symptoms	Reference
1	The system does not notify the Telematics Service Provider Center automatically after collision.	Diagnostics with Phenomenon > INSPECTION
2	The system does not notify the center even if the SOS button is pressed.	Diagnostics with Phenomenon > INSPECTION
3	The system places an SOS call unintentionally during driving.	Diagnostics with Phenomenon > INSPECTION
4	The system places an I-CALL unintentionally during driving.	Diagnostics with Phenomenon > INSPECTION
5	The system does not notify the center even if the i-button is pressed upon vehicle malfunction.	Diagnostics with Phenomenon > INSPECTION
6	Remote Vehicle Locator cannot locate the vehicle.	Diagnostics with Phenomenon > INSPECTION
7	Remote Vehicle Locator indicates an incorrect location and therefore the vehicle cannot be located.	Diagnostics with Phenomenon > INSPECTION
8	Remote Door Lock does not lock the doors of the vehicle.	Diagnostics with Phenomenon > INSPECTION
9	The doors lock unintentionally.	Diagnostics with Phenomenon > INSPECTION
10	The doors unlock unintentionally.	Diagnostics with Phenomenon > INSPECTION
11	Remote Horn & HAZARD Lights do not operate upon request.	Diagnostics with Phenomenon > INSPECTION
12	When the Vehicle Security Alarm is activated, notification is not sent.	Diagnostics with Phenomenon > INSPECTION
13	When a Malfunction indicator light/warning light is lit, notification is not sent.	Diagnostics with Phenomenon > INSPECTION
14	Maintenance Notifications are not sent.	Diagnostics with Phenomenon > INSPECTION
15	The LED does not display the status. (LED malfunction)	Diagnostics with Phenomenon > INSPECTION
16	Phone conversation is not possible. (The microphone does not respond to a voice. No sound is heard from the speaker.)	Diagnostics with Phenomenon > INSPECTION

Clear memory mode operation

1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».3. On «Main Menu» display, select «Each System».4. ...

Electrical component location location

(1)Data link connector(3)Telematics sub antenna(5)Audio or navigation(2)GPS antenna(4)Data communication module (DCM)(6)Instrument panel speaker (standard and H/K specifications)(1)Telematics antenna( ...

Other materials:

Dtc b1014 acc power
DTC DETECTING CONDITION:Voltage failure caused by poor contact of ACC power supply circuitACC voltage was outside the range of 8.3 — 16.7 V, when ACC power supply was ON.Time Needed for Diagnosis:40 s or moreTROUBLE SYMPTOM:DRL may not illuminate.WIRING DIAGRAM:Shift lock control system Shift Loc ...