1. Remove the reservoir tank. CAUTION: Be careful not to tighten a vise excessively. (1) Place the master cylinder assembly between aluminum plates and fix it on a vise. (2) Drive out the pin using a punch and a hammer to remove the reservoir tank. 2. Remove the seal from the cylinder body assembly. |
Installation
1. Install the floor mat.CAUTION:If the hook - rear seat is disconnected from the vehicle body, make sure to replace the hook - rear seat with a new part to prevent the decline of the fixed force of the seat.NOTE:Secure the mat firmly with clips.2. Install the pull handle cover.3. Install the lower ...