Subaru Legacy BN/BS (2015-2019) Service Manual: Disassembly
CAUTION: • The piston cannot be removed from the caliper body assembly. • Do not remove the parking brake actuator assembly except when there are system malfunctions (such as emergency release of parking brake or abnormal actuator) or when the caliper is replaced. When the parking brake actuator assembly is reused, always replace the O-ring with a new part contained in the caliper body assembly. 1. Remove mud and foreign matter from the caliper body assembly. 2. Remove the piston boot.
3. Remove the bushing from the support - rear disc brake.
|
Inspection
1. Check the piston sliding part of caliper body and the piston - disc brake for uneven wear, damage or rust.2. Check the rubber parts for damage or deterioration.3. If faulty is found in the inspecti ...
Rear disc rotor
...
Other materials:
Dtc p0341 camshaft position sensor "a" circuit range/performance bank 1 or single sensor
NOTE:For the diagnostic procedure, refer to DTC P0340. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P0340 CAMSHAFT POSITION SENSOR "A" CIRCUIT BANK 1 OR SINGLE SENSOR1. OUTLINE OF DIAGNOSISDetect the malfunction of camshaft position sensor property.Judge as NG when the number of ca ...
