1. Remove the oil stopper plate. 2. Remove all plugs from the transmission case. 3. Remove the oil seal using a screwdriver wrapped with cloth etc. 4. Using the ST, remove the ball bearing of the secondary pulley. (1) Remove the claw of ST1, and attach the claw of ST2.
(2) Using the ST, remove the ball bearing of the secondary pulley.
5. Remove the oil guide. 6. Remove the ball bearing from reduction driven gear using ST.
7. Remove the CVTF filter cover and gasket. 8. Remove the CVTF filter. |
Dtc p0462 fuel level sensor "a" circuit low
NOTE:For the diagnostic procedure, refer to DTC P0463. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P0463 FUEL LEVEL SENSOR "A" CIRCUIT HIGH1. OUTLINE OF DIAGNOSISDetect the open or short circuit of fuel level sensor. Judge as NG if out of specification.2. COMPONENT DESCRIPTION(1)E ...