1. Remove the throttle body. Throttle Body > REMOVAL 2. Remove the EGR pipe. EGR Pipe > REMOVAL 3. Remove the EGR control valve. EGR Control Valve > REMOVAL 4. Remove the purge control solenoid valve. Purge Control Solenoid Valve > REMOVAL 5. Remove the manifold absolute pressure sensor. Manifold Absolute Pressure Sensor > REMOVAL 6. Remove the fuel delivery pipe assembly from the intake manifold assembly. NOTE: Disconnect the quick connector as shown in the figure.
7. Remove the fuel pipe assembly from the intake manifold assembly. |
Dtc p0420 catalyst system efficiency below threshold bank 1
DTC DETECTING CONDITION:Detected when two consecutive driving cycles with fault occur.TROUBLE SYMPTOM:• Engine stalls.• Idle mixture is out of specifications.CAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode ...