CAUTION: • Use gloves to avoid damage and putting fingerprints on the lens surface and meter surfaces. • Be sure not to touch the meter indicator needle. • Because LEDs are used for all of warning lights and indicator lights, they are not removable from the meter - main assembly. 1. Remove the screws, and then remove the outer mask. Preparation tool: TORX® T10 2. Release the claws and remove the lens. |
Installation
CAUTION:• When reusing the tether clip on the upper part of the trim panel - front pillar UPR, check that there is no damage to the tether clip. If the tether clip is damaged, always replace it with a new tether clip. If the tether clip is damaged, its holding force is reduced and the trim pan ...