Subaru Legacy BN/BS (2015-2019) Service Manual: Disassembly
CAUTION: Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb. 1. TAIL LIGHT/STOP LIGHT BULB NOTE: Since the LED type is a non-disassembled part, it cannot be removed. 2. TURN SIGNAL LIGHT BULB Rotate the bulb socket in the direction of arrow shown in the figure to remove the turn signal light bulb. • Sedan model
• OUTBACK model
3. SIDE MARKER LIGHT BULB 1. Rotate the bulb socket in the direction of arrow shown in the figure to remove the side marker light bulb. • Sedan model
• OUTBACK model
|
Inspection
1. Apply battery voltage between the connector terminals to check the lighting condition of the light.• Sedan modelTerminal No.Inspection conditionsSpecification3 (+) — 2 (−)Apply batter ...
Other materials:
Removal
1. Remove the front tires.2. Remove the collector cover.(1) Carefully pull up the rear of collector cover at two positions (A).(2) Carefully pull up the front of collector cover at two positions (B) while moving it forward.3. Disconnect the ground terminal from battery sensor. NOTE4. Remove the air ...
