Subaru Legacy BN/BS (2015-2019) Service Manual: Disassembly

Subaru Legacy BN/BS (2015-2019) Service Manual / Manual transmission and differential(6mt) / Reverse idler gear / Disassembly

1. REVERSE IDLER GEAR ASSY

1. Remove the snap ring and friction plate.

(A)	Friction plate
(B)	Snap ring

2. Remove the reverse idler sub gear and reverse idler spring.

(A)	Reverse idler sub gear
(B)	Reverse idler spring
(C)	Reverse idler gear

Inspection

1. Check the clearance between the reverse idler gear bushing and reverse idler gear washer. If the value is out of specification, select the appropriate reverse idler gear bushing and adjust.Clearanc ...

Assembly

1. REVERSE IDLER GEAR ASSY1. Attach the reverse idler sub gear and reverse idler spring.NOTE:Point the stamp (marking A) towards the outside, and install the reverse idler sub gear.(A)Reverse idler su ...

Other materials:

Dtc u0423 invalid data received from instrument panel cluster control module
DTC DETECTING CONDITION:Defective data was transmitted from combination meter.TROUBLE SYMPTOM:Display of combination meter does not operate properly.STEPCHECKYESNO1.CHECK PERFORMING OF BASIC DIAGNOSTIC PROCEDURE.Was the basic diagnostic procedure performed up to STEP 8- Diagnostic Procedure with Dia ...