1. TRANSFER CASE 1. Remove the interlock plate. NOTE: Do not remove the precoat bolt (B) if the parts are assembled as a transmission assembly.
2. Remove the shift link assembly. Shift Link Assembly > REMOVAL 2. EXTENSION CASE 1. Remove the transfer drive gear assembly. Transfer Drive Gear > REMOVAL 2. Remove the oil seal from the extension case. Oil Seal > REPLACEMENT 3. Remove the dust cover. |
Installation
1. Install the regulator and motor assembly rear.Tightening torque:7.5 N·m (0.8 kgf-m, 5.5 ft-lb)2. Install the glass assembly - rear door. Rear Door Glass > INSTALLATION3. Install the sealing cover - rear door.4. Install the trim panel - rear door. Door Trim > INSTALLATION5. Connect the gr ...