Subaru Legacy BN/BS (2015-2019) Service Manual: Disassembly

Subaru Legacy BN/BS (2015-2019) Service Manual / Power assisted system (power steering) / Steering wheel / Disassembly

1. Remove the screw, disconnect the connector and remove the paddle shift switch. (Model with paddle shift)

2. Release the claws and remove the screws, then detach the cover - spoke.

3. Remove connector and screw, and remove the cover - steering wheel LWR.

4. Release the claws and remove the screws, then detach the satellite switch.

5. Release the claws, and then remove the MID switch.

Inspection

1. PADDLE SHIFT SWITCH1. Measure the resistance between connector terminals.Preparation tool:Circuit testerTerminal No.Inspection conditionsStandard3 — 4Operate the + side of paddle shift assembly a ...

Universal joint

...

Other materials:

Disassembly
1. Remove the oil stopper plate.2. Remove all plugs from the transmission case.3. Remove the oil seal using a screwdriver wrapped with cloth etc.4. Using the ST, remove the ball bearing of the secondary pulley.(1) Remove the claw of ST1, and attach the claw of ST2.ST1 398527700PULLER ASSYST2 1 ...