Subaru Legacy BN/BS (2015-2019) Service Manual: Disassembly
1. Using a coil spring compressor, compress the coil spring. 2. Using a hexagon wrench to prevent the shock absorber piston rod from turning, remove the self-locking nut with ST. CAUTION: When installing the coil spring compressor to the coil spring, follow the operation manual accompanied with the coil spring compressor during operation. Preparation tool: ST: STRUT MOUNT SOCKET (20399FG000) NOTE: The installing position of coil spring compressor varies depending on the coil spring shape and winding number.
3. Remove the rubber seat - shock UPR and shock mount - rear from the shock absorber COMPL - rear. 4. Gradually decrease the compression pressure of compressor, and remove the coil spring - rear. 5. Remove the helper - rear and the dust cover - rear shock. |
Disposal
CAUTION:• Before handling the shock absorber, be sure to wear goggles to protect eyes from gas, oil and cutting powder.• Do not disassemble the shock absorber or place it into a fire.&bull ...
Rear stabilizer
...
Other materials:
Electrical specification
1. RADAR SENSORTerminal No.ContentMeasuring conditionStandardRadar sensor LH (master)Radar sensor RH (slave)1 ←> Chassis groundPrivate CAN HPrivate CAN HAlways1 M- or more2 ←> Chassis groundMaster CAN H — Always1 M- or more3 ←> Chassis ground — — — — 4 ←> Chassis gro ...
