Subaru Legacy BN/BS (2015-2019) Service Manual: Disposal
CAUTION: • Before handling the strut damper and shock absorber, be sure to wear goggles to protect eyes from gas, oil and cutting powder. • Do not disassemble the strut damper and shock absorber or place them into a fire. • When discarding gas filled strut dampers and shock absorbers, drill holes in them to purge the gas. 1. Place the strut damper and shock absorber on a level surface with the piston rod fully expanded. 2. Make a hole into the specified position 30 mm (1.18 in) deep using a drill with 2 — 3 mm (0.08 — 0.12 in) diameter.
|
Inspection
Check the removed part for wear, damage and cracks, and then repair or replace it if defective.1. STRUT COMPL - FRONT1. Check for oil leaks.2. Move the piston rod up and down to check that it operates ...
Disassembly
1. Using a coil spring compressor, compress the coil spring.2. Using a hexagon wrench to prevent strut rod from turning, remove the self-locking nut with ST.CAUTION:When installing the coil spring com ...
Other materials:
Windows
WARNING
To avoid serious personal injury
caused by entrapment, always conform
to the following instructions
without exception.
When operating the power windows,
be extremely careful to
prevent anyone's fingers, arms,
neck, head or other objects from
being ...
