CAUTION: • Before handling the shock absorber, be sure to wear goggles to protect eyes from gas, oil and cutting powder. • Do not disassemble the shock absorber or place it into a fire. • Drill a hole into shock absorbers in case of discarding shock absorbers filled with gas. 1. Place the shock absorber on a level surface with the piston rod fully expanded. 2. Make a hole into the specified position 30 mm (1.18 in) deep using a drill with 2 — 3 mm (0.08 — 0.12 in) diameter.
|
Dtc p0102 mass or volume air flow sensor "a" circuit low
DTC DETECTING CONDITION:Immediately at fault recognitionTROUBLE SYMPTOM:• Improper idling• Engine stalls.• Poor driving performanceCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PRO ...