It is unnecessary to check the deflection of the drive belt periodically because your engine is equipped with an automatic belt tension adjuster. However, replacement of the belt should be done according to the maintenance schedule in the "Warranty and Maintenance Booklet". Consult your SUBARU dealer for replacement. If the belt is loose, cracked or worn, contact your SUBARU dealer. |
Dtc b1807 short in passenger's airbag (to ground)
DIAGNOSIS START CONDITION:Ignition voltage is 10 V to 16 V.DTC DETECTING CONDITION:GND short circuit failure (shorted to ground in main harness, shorted to ground in passenger’s airbag, shorted to ground in airbag CM internal circuit)CAUTION:Before performing diagnosis, refer to “CAUTION ...