Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc b11f3 front impact deployment
DIAGNOSIS START CONDITION: Ignition voltage is 10 V to 16 V. DTC DETECTING CONDITION: Front impact ignition, ignition delay (on the 2nd stage ignition) This DTC is indicated when the front airbag module and the pretensioner are deployed. Once this DTC is displayed, the memory cannot be cleared. Therefore replace the following parts. • Airbag control module Airbag Control Module • Driver’s airbag module Driver’s Airbag Module • Passenger’s airbag module Passenger’s Airbag Module • Front sub sensor of both sides Front Sub Sensor • Front outer seat belt with pretensioner of both sides Front Seat Belt • Steering roll connector Roll Connector • Occupant detection system (passenger’s seat cushion & frame assembly) Front Seat • Curtain airbag module (if deployed) Curtain Airbag Module • Seat cushion airbag module Seat Cushion Airbag Module |
Dtc b11f4 front impact deployment
DIAGNOSIS START CONDITION:Ignition voltage is 10 V to 16 V.DTC DETECTING CONDITION:Front impact ignition, ignition delay (on the 1st stage ignition)NOTE:For details on DTC B11F4, refer to DTC B11F3. ...
Dtc b11e0 rollover deployment history
DIAGNOSIS START CONDITION:Ignition voltage is 10 V to 16 V.DTC DETECTING CONDITION:This DTC is indicated when the curtain airbag module and the seat belt pretensioner are deployed.Once this DTC is dis ...
Other materials:
Secondary pressure (line pressure) test inspection
CAUTION:• Directly after the vehicle has been running or the engine has been idling for a long time, the CVTF is hot. Be careful not to burn yourself.• Make sure no other person is around the vehicle during secondary pressure (line pressure) test measurement.• After performing the ...
