DIAGNOSIS START CONDITION: • Battery voltage is 10 V or more. • The remote engine starter was not used to start the engine. DTC DETECTING CONDITION: • Defective immobilizer CM • Failed to access the ROM in immobilizer CM. TROUBLE SYMPTOM: Engine will not start. CAUTION: When the immobilizer CM is replaced, registration of the immobilizer system is required. For details, refer to the “REGISTRATION MANUAL FOR IMMOBILIZER” provided as a separate volume.
|
Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the bolt securing the purge control solenoid valve onto intake manifold assembly.NOTE:Hold the purge control solenoid valve unit by hand to prevent it from rotating together.3. Disconnect the vacuum hose from the intake manifold a ...