Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc b280f combination meter malfunction

Subaru Legacy BN/BS (2015-2019) Service Manual / Eyesight (diagnostics) / Diagnostic procedure with diagnostic trouble code (dtc) / Dtc b280f combination meter malfunction

Malfunction is detected in the combination meter.

DTC DETECTING CONDITION:

Defective combination meter

TROUBLE SYMPTOM:

• All functions of EyeSight system do not operate.

• EyeSight warning light blinks or illuminates.

• Combination meter does not illuminate.

NOTE:

Check the combination meter. Combination Meter System > INSPECTION

Dtc b2810 incompatible with eyesight (combination meter)

Detected when the combination meter, which is not designed exclusively for EyeSight is installed.DTC DETECTING CONDITION:Incorrect specifications of combination meterTROUBLE SYMPTOM:All functions of E ...

Dtc b280c vdc brake control prohibit

Detected when error occurs in the VDC. (VDC fluid pressure control prohibited)NOTE:Check the VDC. Basic Diagnostic Procedure > PROCEDURE ...

Other materials:

Installation
1. Install the leak check valve assembly to the canister.Tightening torque:8 N·m (0.8 kgf-m, 5.9 ft-lb)2. Connect the drain tube (A).CAUTION:• Check that there is no damage or dust on the quick connector. If necessary, clean the seal surface of the pipe.• Make sure that the quick ...