Detected when adjustment or inspection of stereo camera has not been completed normally. DTC DETECTING CONDITION: • Operation is aborted during adjustment or inspection of the stereo camera. • After the replacement of the stereo camera, adjustment or inspection of camera has not yet been performed. TROUBLE SYMPTOM: All functions of EyeSight system do not operate. For diagnostic procedure, perform adjustment/inspection of camera. When the adjustment or inspection of camera is performed, and if it is not completed successfully, replace the camera. |
Installation
CAUTION:Be sure to prevent water or oil from contacting the connector terminal of secondary speed sensor. If adhesion occurs, replace with a new part.1. Install the secondary speed sensor.NOTE:• Use new O-rings.• Apply CVTF to the O-rings.Tightening torque:5 N·m (0.5 kgf-m, 3.7 ft ...