DTC DETECTING CONDITION: • A fault is detected if a change of the vehicle speed from high to low occurs for a predetermined number of times or more, while a change of the stop light switch from OFF to ON is not detected. • A fault is detected if stop light switch ON status continues for long time while the vehicle speed is at the predetermined speed or higher. TROUBLE SYMPTOM: • VDC does not operate. • Hill hold does not function. • EyeSight does not operate sometimes. (Models with EyeSight) NOTE: If the pressure sensor is defective, this DTC may probably be stored in addition to pressure sensor malfunction. WIRING DIAGRAM: Vehicle dynamics control system Vehicle Dynamics Control System
|
Installation
1. Install the center differential and transfer driven gear into the transfer case as a unit. Transfer Driven Gear > INSTALLATION2. Select the adjusting washer. Transfer Case and Extension Case Assembly > INSTALLATION3. Install the transfer driven gear. Transfer Driven Gear > INSTALLATION4. Insta ...