Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc c1733 longitudinal g sensor
DTC DETECTING CONDITION: • A fault is detected if the communication status of longitudinal G sensor is abnormal. • A fault is detected if malfunction judgment is generated by self-diagnosis test of the longitudinal G sensor. • A fault is detected if the longitudinal G sensor signal is out of normal range. • A fault is detected if the longitudinal G sensor compensation value is out of normal range. TROUBLE SYMPTOM: • ABS does not operate. • VDC does not operate. • Hill hold does not function. • EyeSight does not operate. (Models with EyeSight) NOTE: For the diagnostic procedure, refer to “DTC C1732 LATERAL G SENSOR”. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C1732 LATERAL G SENSOR |
Dtc c1742 wheel cylinder pressure sensor
DTC DETECTING CONDITION:• A fault is detected if the condition that supply voltage for the fluid pressure sensor is out of normal judgment range continues for predetermined time.• A fault ...
Dtc c1732 lateral g sensor
DTC DETECTING CONDITION:• A fault is detected if the sensor signal value is not correct.• A fault is detected if the steering angle sensor signal / yaw rate sensor signal change while the ...
Other materials:
Dtc b1431 in-vehicle (post evaporator) temperature sensor circuit short-circuit
DTC DETECTING CONDITION:In-vehicle sensor circuit is shorted.TROUBLE SYMPTOM:In-vehicle air temperature is falsely recognized as 25°C (77°F), and the compartment temperature is adjusted.WIRING DIAGRAM:Air conditioning system Air Conditioning System > WIRING DIAGRAMSTEPCHECKYESNO1.CHEC ...
