Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc c2513 torque sensor much tolerance

Subaru Legacy BN/BS (2015-2019) Service Manual / Power assisted system (power steering) (diagnostics) / Diagnostic procedure with diagnostic trouble code (dtc) / Dtc c2513 torque sensor much tolerance

DTC DETECTING CONDITION:

When torque sensor main/sub output voltage failure is detected after the ignition switch is ON.

NOTE:

Refer to “DTC C2511 TORQUE SENSOR MAIN” for diagnostic procedure. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C2511 TORQUE SENSOR MAIN

Dtc c2514 torque sensor power supply

DTC DETECTING CONDITION:When torque sensor power supply voltage failure is detected after the ignition switch is ON.NOTE:Refer to “DTC C2511 TORQUE SENSOR MAIN” for diagnostic procedure. ...

Dtc c2512 torque sensor sub

DTC DETECTING CONDITION:When torque sensor sub output voltage failure is detected after the ignition switch is ON.NOTE:Refer to “DTC C2511 TORQUE SENSOR MAIN” for diagnostic procedure. Di ...

Other materials:

Dtc u0126 lost communication with steering angle sensor module
DTC DETECTING CONDITION:No data is received from steering angle sensor.TROUBLE SYMPTOM:VDC CM does not operate normally.STEPCHECKYESNO1.CHECK PERFORMING OF BASIC DIAGNOSTIC PROCEDURE.Was the basic diagnostic procedure performed up to STEP 8- Diagnostic Procedure with Diagnostic Trouble Code (DTC) > ...