DTC DETECTING CONDITION: • When torque sensor peripheral circuit malfunction inside the power steering control module is detected after assist starts with 500 rpm engine speed reception. • When storage medium IC malfunction inside the power steering control module is detected at initial check. • When motor drive circuit malfunction is detected after assist starts with 500 rpm engine speed reception. • When motor driving element driver malfunction is detected after the ignition switch is ON. • When intercommunication error of the power steering control module is detected after the ignition switch is ON. TROUBLE SYMPTOM: • The steering wheel operation feels heavy. • STEERING warning light illuminates. NOTE: When this code is displayed, replace the steering gearbox with a new part. Electric Power Steering Gearbox |
Inspection
CAUTION:When wiping dirt off of the glass to avoid heat wire damage, be careful of the following.• Use a dry and soft cloth.• Move the cloth along the heat wire.Inspection method of antenna, it is different from printing pattern of antenna.TYPE-APrinting pattern of gridTYPE-BPrinting pat ...