Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc c2548 vehicle dynamics control module system

Subaru Legacy BN/BS (2015-2019) Service Manual / Power assisted system (power steering) (diagnostics) / Diagnostic procedure with diagnostic trouble code (dtc) / Dtc c2548 vehicle dynamics control module system

DTC DETECTING CONDITION:

When error flag from VDCCM is detected for 2 seconds after the ignition switch is ON.

STEPCHECKYESNO

1.CHECK DTC.

Read the DTC of VDC system using the Subaru Select Monitor.

Is a DTC related to VDC system (sensors) detected-

Perform the diagnosis according to the DTC. List of Diagnostic Trouble Code (DTC)

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C2548 VEHICLE DYNAMICS CONTROL MODULE SYSTEM

2.CHECK LAN SYSTEM.

Perform the diagnosis for LAN system using the Subaru Select Monitor. Basic Diagnostic Procedure

Is a DTC related to CAN communication detected-

Perform the diagnosis according to the DTC. List of Diagnostic Trouble Code (DTC)

Replace the steering gearbox. Electric Power Steering Gearbox

Dtc c2551 power supply relay
DTC DETECTING CONDITION:• When contact deposit malfunction of power supply relay is detected at initial check.• When power supply voltage failure is detected after the ignition switch is O ...

Dtc c2547 eyesight check sum
DTC DETECTING CONDITION:When check sum error of EyeSight transmission data is detected after the ignition switch is ON.TROUBLE SYMPTOM:EyeSight steering support function does not operate.STEPCHECKYESN ...

Other materials:

Caution
• When performing any work, always wear work clothes, a work cap and protective shoes. Additionally, wear a helmet, protective goggles, etc. if necessary.• Remove contamination including dirt and corrosion before removal, installation, disassembly or assembly.• Keep the disassemble ...

© 2017-2024 Copyright www.sulegacy.com